Part of the Harris® PR&E® portfolio, Oasis™ is a high-value standalone audio console for on-air and radio production applications. Simply connect microphones, source equipment and audio monitors — even a PC automation channel (no sound card required) — directly into the Oasis console and be on the air.
Designed with next-generation studio demands in mind, Oasis allows facilities to cost-effectively and easily migrate from analog to digital whenever they’re ready. In addition to capabilities for all necessary audio and logic components, Oasis provides both analog and digital outputs that enable facilities to connect to modern STLs and studio infrastructures.
Options and Installation
The Oasis audio console is available in two sizes: 8-fader channels and 12-fader channels.
Oasis has several input card options — a balanced analog A/B input card, a microphone line A/B input card, an AES Digital A/B card, and a USB/AES A/B card. Each hot-swappable card represents eight total inputs available to the four corresponding faders.
The console provides all the monitoring outputs needed, including monitor and headphones for control room and studio. It even offers a remote level control option for the studio monitors, along with a direct “talk to studio” interface from the console.
Oasis features two meters, the second of which is switchable. It also displays an event timer with the controls necessary to track all show elements.
In addition to the host of standard Oasis features, an optional 8x1 RLS module is also available as an option for input expansion. The control for this remote line selector is offered in a convenient console drop-in panel.
Phoenix Conbicon connectors allow for rapid and easy wiring without the need for any special crimpers or tools.
Specifications and designs are subject to change without notice.
|Analog Line Inputs(all inputs and outputs are +4 dBu, balanced)|
|Input Impedance||>40 k ohms, balanced|
|Nominal Input Level||+4 dBu|
|Maximum Input Level||+24 dBu|
|Analog Line Outputs(all inputs and outputs are +4 dBu, balanced)|
|Output Source Impedance||<3 ohms balanced|
|Output Load Impedance||1 k ohms minimum|
|Nominal Output Level||+4 dBu|
|Maximum Output Level||+24 dBu|
|Conversions||A/D 24-bit, Delta-Sigma, 128x oversampling
D/A 24-bit, Delta-Sigma, 128x oversampling
|Latency||<1.6 ms, analog input to analog output|
|AES-3 Output Compliance||24-bit|
|Output Sample Rate||44.1 kHz, system referenced|
|Logic Inputs||Opto-isolated, floating or referenced to internal +5 VDC via DIP switch|
|Logic Outputs||Opto-isolated, floating or referenced to internal ground via DIP switch. Outputs are independently configured for pulse or continuous, open or closed operation|
|Audio Frequency Response|
|Analog Input to Analog Output||+0 dB/-0.5 dB, 20 Hz to 20 kHz|
|Audio Dynamic Range (referenced to FSD)|
|Analog Input to Analog Output||103 dB, 106 dB “A” weighted|
|Analog Input to Digital Output||107 dB|
|Audio Total Harmonic Distortion + Noise|
|Analog Input to Analog Output||<0.005%, 20 Hz to 20 kHz, +18 dBu input, +18 dBu output|
|Audio Crosstalk Isolation|
|Adjacent Analog Inputs or Outputs||>95 dB, 20 Hz to 20 kHz|
|Dimensions (H x W x D)||Oasis-08: 5.49 x 22.0 x 17.25 in.
Oasis-12: 5.49 x 28.4 x 17.25 in.
|Type||External, ‘line lump’ style, plug-in power supply|
|Input voltage||100 to 240 VAC, 50/60 Hz|
|AC input||Detachable IEC cord with C5 (Mickey Mouse) connector|
|Output voltage||+12 VDC|
|Power Requirements||<100 W at 120 VAC/60 Hz|